Category Archives: Raised Beds

Building raised beds

I was working on more raised beds the past few days, and took a few more pictures to describe some steps in detail. See the Recycling Fence Panels post for more details on why I building out of old fence panels.

Closeup bed

A closeup of the end of the bed showing the three nails through the laterals.

First, assembling the bed. I do this in a flat area in the grass. It is easier to work in the grass than in the dirt where the bed will go. It is also easier to build a few boxes at a time and as we’ll see in a bit you can’t do that in building in place. I cut the fence laterals between every fourth slat which actually works out evenly for a typical panel. I examine the top and bottom of the cut sections and use ones that don’t look as nice for the sides that must be trimmed off. Then the four sides get laid out in the grass and I start nailing.

Completed bed

The completed bed with the big hammer and jug of nails.

I use 16D galvanized nails, three to a corner. I bought a huge box on clearance a couple of years ago and keep some in an old jug to take to my projects. I also use a 22oz hammer as these are big nails. It is well worth having the proper tool for the job. I nail the former laterals to laterals so that the nails are in the thickest wood available. As I said in the prior post, I put the laterals on the outside so that they don’t stay perpetually wet in the soil.

Once the bed is in place it is time to fill it with soil. I use loam that I have dug up from pond making to fill the beds. Because there are rocks, roots and clumps of grasses and ferns in the loam, I hand screen it all before it goes in the bed. Nothing fancy, I just put the bucket of loam over the bed and using my hands and a garden fork screen through and pull out anything I don’t want. This takes time, but will result in soil that is much easier to work in the future. I also put in some composted manure into the bed when its made. Over time we’ll add mulch, compose and biochar so that the soil in the beds will improve over time.

Loam

A bucket full of loam ready to be screened.

One more important step, and that is to plan the building of the beds in an order so that the tractor can get to them while they are being made. It would be much harder to move the loam and do the screening without the tractor. In the above picture, the tractor bucket is right over the first bed and the second bed is off to the right. The below picture shows the second bed in place after the first has been filled. The tractor is not getting back to the first bed.

Next Bed

The next bed is placed after the first is filled.

For the first few beds that were put in place, we put clean cardboard down underneath to try and keep the prior occupants of the space from growing up through the soil as we’ve had happen before. For this row of beds, I used the blade of the tractor to remove nearly everything first. We’ll see what the difference is.

To the left of the first bed is a great big rock just under the soil. I was going to put thinner beds here at first, but when I found the rock, I decided to use wider beds to avoid putting a bed on the rock. I won’t build any more rows  to the left this year, but I’ll be extending all the rows as I work back toward the yard. More to come.

Recycling Fence Panels

The trailer is fully loaded with fencing

The trailer is fully loaded with fencing

Grandpa Gove had some of his fence replaced recently. It is the kind of job where a lot of the panels are in fair condition, but you really need to replace a whole side at once. So there are a lot of fairly good panels and even some posts that could be reused. Rather than pay to dispose of all the fencing, I’ve been bringing them to Gnome Knoll. Here is the second load on the trailer. It is amazing how well the Prius tows the load, and still gets about 30 mpg.

The trailer is an easy lift for the tractor

The trailer is an easy lift for the tractor

The problem is that the fence heavy, and loaded a bit forward for security, so that the hitch is too heavy for me to lift off the car. Last time I used the tractor bucket to push down on the back of the trailer. That worked, but not real well. So this time I just carefully used the tractors muscle directly. This was much easier and now the hitch is on a block off the ground.

So what happens to all those panels? We really don’t need that much privacy. They could be used to keep out deer, but then they would need strong posts to keep them up against the wind. It is easier to use mesh deer fencing which doesn’t require such strong posts.

At the same time, I had been struggling to figure out how to cheaply make raised beds for the garden. There were lots of old logs piled up in places from the previous owner, but when I went to move them it turned out those were all too rotted to use. Necessity being the mother of invention: I’m making raised beds out of the fence panels! Some cuts with a sawzall, some nails and a hammer and bingo, raised beds.

Raised beds made out of old fence panels. These have peas planted.

Raised beds made out of old fence panels. These have peas planted with stakes ready.

Well, it does require a little bit of forethought as well. For instance, the panels are all used back side out because while it might be prettier the other way, this way the nails are all through the thicker wood that is outside bed and will dry out better. With other wooden raised beds, I’ve found the weakest point is the joints where they are nailed together. Those seem to fall apart well before the rest of the side has rotted out. We’ll see if this works better.

One also has to be careful about spacing of the raised beds. With past beds, I was trying to squeeze them in too close together and made it too hard to work in them. This time I am going with a measured two foot spacing. I have also allowed a wider six foot space for the tractor to be able to get through if necessary. I will be putting many of the various recycled portable planters into that wide space so that it won’t be wasted most of the time when the tractor doesn’t need to go through.

Raised beds with a six foot wide gap to allow a tractor through.

Raised beds with a six foot wide gap to allow a tractor through.

Now with today’s load I have a lot more fence panels to make a lot more raised beds to grow a lot more stuff. All this work is making me hungry. Hurry up and grow, food.